Wireless Digital phone

AFH technology super anti-jamming capability share 2.4G band with wireless LAN bluetooth devices configure code function

2.4G Wireless Digital phone  TA-222

 

 

Electrical properties

1,Using 2.4G ISM public frequency band: 2402-2483MHz

2,Air transfer rate: 250K

3,Transmitting Power: Less than 20dBm(Less then 100mw), Receive Sensitivity: -100 or less

4,AFH technology, super anti-jamming capability, can share 2.4G band with wireless LAN and bluetooth devices

5,Panel a call key and two indicator lights: power indicator light(red) and operating light(green).

6,With configure Code function

7,Power supply: AC 110/220V,  Electric Current: within 200mA

8,Communication distance:  more than 500 meters in open land

Instruction

ID setting, Coding, Transmit code, Receive code setting instruction:  

Press CALL. Number3, 4 button, and then connect to electricity,   release the thress button until the RED,GREEN light bright and create sound “Di..”   then enter into setting status.

1.    ID setting     

Press the CALL button, RED,GREEN light bright, release CALL button, RED, GREEN light extinguish, then enter into ID setting status.

ID number is from 0 to 99.  Press the ID number you want and then press the CALL button to confirm, then ID number setting successfully,  At this time RED, GREEN light twinkle and create 3 sounds “Di..” to exit code setting status and return to setting status.

2.  Coding

Press Number 3 button, RED, GREEN light bright and enter into coding status.  Coding time is 16 seconds.  If coding successful will sounds 3 “Di..” while two lights twinkle 3 times alternately to exit coding status and return to setting status.  If coding failed, RED, GREEN light extinguish to exit coding status and return to setting status.

3. Transmitting Code

Press number button 4, RED, GREEN light bright and enter into transmitting code status.  If transmitting code time exceed 16 seconds ,can press number button 9 to exit seting status and enter into standby status.

4. Receiving Code

Press number button 5, RED,GREEN light bright and enter into receiving code status.  Receiving code time is 16 seconds.  If receiving code successfully will sound 3 “Di..” and the indicator lights twinkle 3 times alternately to exit receiving code status and return to setting status.  If receiving code failed, RED,GREEN light extinguish to exit receiving code status and return to setting status.

     

5. Press number button 9 to exit setting status, sounds 3 “Di…” and enter into standby status.

Note: on the above steps, press number button 3 to coding, number

button 4 to transmitting code,  the Number button 3, 4 should be on

the master intercom,  then accordingly press number button 5 on

extension intercom to enter into receiving code status.  For example:

When coding for two intercoms, should press number button 3 on the

master intercom, press number button 5 on extension intercom. 

When transmitting code, press number button 4 on master intercom,

press number button 5 on extension intercom.

Remark: When press number button,  it will be available within 4 seconds,  will clear up the record after 4 seconds.

 

Wireless Digital phone